• Home
  • Fall Protection Safety Systems You Need To Know

Fall Protection Safety Systems You Need To Know

Safety always comes first. This is also applicable for fall protection training. This training is important for those who all work at heights like the construction engineers, the shipping staff, etc who are most of the time found at several feet above the ground level. This course protects the on-site employees and also complies with the OSHA rules and regulations. No matter you are working in the shipping industry, a warehouse, or in a construction site, you must know the safety systems. Joining a good institute for a fall protection course in Vancouver is a good idea to learn the safety systems in detail.   The Course Includes Three Types Of Fall Protection – Prevention, Arrest, And Restrain.   Fall prevention safety system: - The fall prevention safety system’s main objective is to prevent accidents from taking place. With the use of the barriers and guardrails, you can be rest assured that the employees are completely safe. The use of the guardrails also leaves the employees and labors agile because of the harness and the other equipment used for fall prevention.   Fall restraint safety system: - The fall restraint safety system prevents the employees and workers from falling from heights. Actually, the fall prevention safety system tethers the workers and the employees to a fixed point, thus, preventing them to fall down. This is the most essential safety system in the construction sites where you cannot use the guardrails.   Fall arrest safety system: - Now, there are two different types of fall arrest safety systems – personal and general.   • The general fall arrest safety system is the net or the fall cushioning system below the area where the employees and the workers work above six feet of height. This safety system covers a large area and involves the use of different equipment that makes the system a little expensive as compared to the other fall protection safety systems.   • Personal fall protection arrest is the safety system that is used for arresting the employee during a fall from a height from a few feet above the ground surface. This safety system includes the use of a body harness, a connector, and an anchorage. The modes of connection are the deceleration device, the lanyard, the lifeline, and the perfect combination of all these.   So, that was all about the fall protection safety systems. Knowing all these safety systems can prevent you from accidents in many situations during your working hours. If you want to know more about these safety systems and everything else about fall protection then you can join the best school for undergoing the fall protection training in Vancouver. This will help you to make the safest decisions and take safety precautions when you are at work.

Request a Call Back